Mid Century Tapered Style Furniture Legs. Unfinished Maple or Oak. Great For Sofas, Beds, Chairs, Tables etc. 3"- 12" Set of 4

Mid Century Tapered Style Furniture Legs. Unfinished Maple or Oak. Great For Sofas, Beds, Chairs, Tables etc. 3"- 12" Set of 4



Custom Turned Mid Century Style Furniture Legs. Great for Replacement or your furniture building & refinishing projects. They can be used for replacement legs on your West Elm, CB2, Crate & Barrel, Room and Board sofas and any other brand you may have.
Made of Unfinished Solid Maple or Oak wood, finely sanded so they are ready be stained or Painted. Choose from 3"-12" High, all heights have a 2" top Diameter tapering down to 7/8"
Comes with any attachment method you need.

Photo shows samples of Unfinished Maple in heights of 3" – 12"

How to Order

1. Select your desired Height within the drop down list.

2. Choose the type of wood, Oak or Maple on the drop down list.

*IMPORTANT*

What will you be using them for, we can insert any bolt or screw size, or other attachment hardware needed, for your sofa, bed, table, ottoman etc.

If you need help determining what you need send me a message, we are here to help!

Installation hardware to choose from

HANGER BOLTS: 1/4", 5/16", 3/8", M6, M8, M10

How to determine the bolt size you will need.

If you are replacing an existing leg with a bolt, we will need to match up the current size. This can easily be done by taking one leg to your local hardware store and find a nut that fits the bolt, this method will determine its exact size. Do not measure with a tape or ruler as it is not accurate enough, as many sizes are so close that it is easy to mistake one size for another. Also measure the length that the bolt is protruding out of the top of the leg, so we can insert them at the same length for a perfect fit.

* Please leave a note stating you will need a hanger bolt, and the size and protruding length needed in a message during the checkout process.*

DOWEL SCREWS: 1/4" or 5/16"

If you will need them to screw directly into a wood surface.
* Please leave a note stating you will need a dowel screw, and the size and protruding length needed in a message during the checkout process.*

NO HARDWARE NEEDED:

If you are making your own furniture piece and do not require any attachment bolt, plate etc.

* Please leave a note stating you will not need any attachment hardware, during the checkout process*

MOUNTING PLATES:

If you are attaching them to a piece of furniture that does not have any pre existing legs, this is the easiest method of attachment, they are 2 1/2" square metal plates that screw to the bottom of your furniture on flat surface areas where you would like to add the legs, the bolt in the leg will screw into the center hole in the plates.

You will need to purchase these plates separately , they are available to purchase within our shop, here is the link to the listing for them.
https://www.etsy.com/listing/114471309/mounting-plates-straight-or-angled-for?ref=listings_manager_table

When you purchase legs and mounting plates, we will know to insert the proper bolts
to work with these plates.

Option to add High quality nailed on Felted or Metal Gliders to the bottom of your legs available for an extra $3.99 for a set of 4.
https://www.etsy.com/listing/117586000/glider-foot-added-to-the-bottom-of-you

INTERNATIONAL ORDERS: Please be aware that it is your responsibility to pay customs fees if your country charges them, shipping fees only cover the shipping cost.
Sold by thirteencolonies

Buy now for only 28.00 USD!